NEW! The Latest Breakthrough in EFIE Technology!
For more information, see the article The New Digital EFIE: How It Works
The Quad Digital EFIE Basic is the newest member of our family of EFIEs. Digital EFIEs allow much leaner settings on vehicles than other types of EFIE. We recommend Digital EFIEs for all narrow band oxygen sensors that are upstream of the catalytic converter. Note, that the Quad EFIE uses a pair of analog EFIEs for the downstream sensors (see the article in the link above to see why the downstream EFIEs need to be analog type). Digital EFIEs have the following benefits:
- Can make the air/fuel mix much leaner than earlier designs. With this device you can lug down your engine, and often kill it if you set it too lean.
- Absolutely rock steady adjustment no matter what temperature the environment. Will vary less than 1/2 of 1% over it's rated temperature range of -40 to 125 Centigrade.
- Will work with older, "tired" oxygen sensors that should have been replaced. Other EFIE styles may require these to be replaced. Mind you, if they are old, they should still be replaced. But if they are working prior to your EFIE install, they will still work with this EFIE.
- One adjustment pot modifies both upstream (Digital) EFIEs equally, and similarly, one pot adjusts both downstream (Analog) EFIEs. This makes these devices easier to set.
Note: Some Dodge/Chrysler vehicles have been known to put 2.5 volts on the sensor's "sig low" wire. This raises the signal high wire by 2.5 volts. Our current version of this device will work on these vehicles by flipping a switch.
Complete Systems